RTH401
ENGLISH
6
The setup menu is shown on the following page.
n Press the Up and Down buttons simultaneously for three seconds to enter
the setup menu.
o Press the Up or Down button to change the option.
p Press the Up and Down buttons simultaneously for one second to advance
to the next parameter.
q When the last parameter is displayed, press the Up and Down buttons for
three seconds to save any changes and exit the menu.
NOTE:
If you do not press any button for one minute,
the thermostat will automati-
cally save any changes you have made and will then
return to its normal display
.
Setup procedure
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 6 Thursday, July 9, 2009 2:24 PM
To Next Page
Loading...
