Need help?Do you have a question about the AUDAC DW5066 and is the answer not in the manual?
General| Number of Zones | 6 |
|---|---|
| Power Supply | 24 V DC |
| Sampling Rate | 48 kHz |
| Bit Rate | 24 bit |
| Operating Temperature | 0°C to +45°C |
Introduces the front panel with its main components like display, inputs, and controls.
Details the unbalanced line input, push-lock gain control, clipping LED, and balanced microphone input.
Introduces the rear panel and its connectors, including the 8-pin terminal block and RS485 jumper.
Provides details on the 8-pin Euro Terminal Block connector and the RS485 bus termination jumper.
Guides through the initial setup process, connecting to the matrix system, and assigning addresses.
Describes the different types of flush mount installation boxes for the DW5066.
Explains how to connect the DW5066 wall panels to the PI ports using CAT6 cabling.
Details the steps for assigning addresses and defining inputs for the DW5066 wall panel.
Explains the main screen, zone selection, and navigation using the selection dial.
Details how to use the DW5066 as a local audio output via internal modification.
Lists system specifications, product features, dimensions, weight, construction, and colors.
To Next Page
