Introduction
Digital All-In-One Wall Panel
The DW5066 is an All-in-one wall panel designed to work in combination with AUDAC digital matrix
systems. This wall panel has a graphic display and can control the routing, volume, bass, treble and
mute for multiple zones or outputs (up to 8) on one system. Besides those control functions, it also
provides the possibility to connect a microphone and a stereo line input source. The DW5066 wall
panel should be connected with UTP/FTP Cat6 (or better) cable.
The following functions of multiple zones can be controlled:
- Volume
- Input selection
- Mute
- Bass
- Treble
The microphone input on the wall panel is connected with a female XLR connector, while the line
inputs are performed using RCA connectors.
To Next Page
Loading...
