Front panel description
Unbalanced line input
An unbalanced stereo audio source can be connected to these RCA connectors, creating an
additional local input.
Push-Lock gain control potentiometer with clipping LED
The sensitivity for the line and microphone inputs can be adjusted with these potentiometers.
Through the push-lock mechanism, they can be opened and hidden again by pressing them.
Above every potentiometer is a clipping indicator LED provided which illuminates when clipping
of the input signal occurs. When this LED is lit, the signal is distorted and the level should be
reduced by turning back the potentiometer. The sensitivity for the line and microphone input can
be adjusted between the ranges of 0dB and -∞dB.
Balanced microphone input
A balanced microphone can be connected to this XLR input connector, which allows message
annoucements from a remote input. For powering condenser microphones, there’s the possibility
to provide +15V phantom power to this microphone input. (Software selectable)
To Next Page
Loading...
