Getting Started
Your Maxwell has an expected battery lifespan
of
80+ hours. We recommend fully
charging your Maxwell before first use via any 5v USB source. Maxwell supports 1.8
Amp
fast chargers and will be capable
of
20 to 30 hours
of
charge time
in
20 minutes
Power on your Maxwell by holding down the power button on the front cup for 3
seconds (Audio cue: Power On). Your Maxwell will automatically connect to the first
connected source
in
the connection priority.
Maxwell will connect to the dongle
out
of
the box as long as it's plugged into a
compatible device and the switch on the dongle is
set
to the appropriate mode for
that device (Audio cue: Connected
).
To
turn the microphone on
or
off
, use the toggle switch on the outside
of
the left
earcup (up is on, down is off).
Bluetooth Connection
Pairing via Bluetooth is similar on most platforms.
To
pu
t your Maxwell into Bluetooth
pa
iring
mode,
just
double tap the power button (Audio c
ue
~ Pairing).
M
axvvell
supports
sw
ift pair on Windows and quick pair on Android phones. Simply put your
Maxwell into pairing mode near yo
ur
Windows machine or Android phone and it should prompt
you to pair automatically.
Note: When pairing to any device;
do
not select "Audeze Maxwell BLE". This refers to the
low
energy mode and is not the correct device
fo
r initi
al
pairing.
For system specific pairing inst
ruc
tions, see below:
To Next Page
Loading...