Audi A3 2024 - Shift Light Indicator; Sport Displays; Vehicle Functions

Instrument cluster
Shift light indicator
Applies to: RS models
The shift light indicator indicates when the RPM
limit is reached.
» Select the RS Performance or RS Runway lay-
out if necessary © page 15.
The shift light indicator is displayed with green,
yellow and red ranges in the upper areas of the
tachometer. The shift light indicator will blink red
when approaching the engine speed limit. Shift
to the next highest gear at the right time.
Sport displays
Applies to: RS models
Various sport displays, such as a G meter or tire
pressure indicator, may be available depending
on vehicle equipment.
Opening sport displays in the instrument
cluster
» Select in the instrument cluster: Vehicle func-
tions tab > J button > Sport displays.
» Turn the left thumbwheel on the multifunction
steering wheel until the desired sport display
appears in the instrument cluster.
Opening sport displays in the MMI
» Applies to MMI: Select on the home screen: VE~
HICLE > RS monitor.
» Browse to the desired display if necessary.
G meter
The G meter displays the longitudinal and lateral
acceleration. The current values are displayed in
the instrument cluster while driving. The maxi-
mum values that are reached are stored and dis-
played when the vehicle is stationary. Only the
maximum values that are reached are displayed
in the MMI.
> To reset the stored values, press and hold the
left thumbwheel on the multifunction steering
wheel for one second.
18
Tire pressure
Applies to: vehicles with tire pressure monitoring system
The tire pressure monitoring system displays the
current tire pressures and temperatures. Also see
© page 254, Tire pressure monitoring system.
Engine data
The engine data in the instrument cluster shows
which percentage of the maximum output or
maximum torque is currently being used.
Temperature
The temperature display in the MMI shows the
temperature of various fluids, such as the trans-
mission fluid or engine oil.
Vehicle functions
The trip computer is displayed in the first tab of
the driver information system. Additional vehicle
functions can be accessed depending on the vehi-
cle equipment.
> Press the
ing wheel.
button on the multifunction steer-
—Trip computer © page 18
— Sport displays > page 18
- Lap times page 122
— Lap statistics ® page 122
— Acceleration measurement 9 page 123
— Reduced display page 16
— Reset trip odometer © page 17
On-board computer
Changing the display
> Turn the left thumbwheel on the multifunction
steering wheel @ > page 15, fig. 6 until the
desired display is shown.
Resetting values to zero
Requirement: the Consumption, Short-term
memory, or Long-term memory display must be
selected.
» To reset the values in one of the memories to
Zero, press and hold the left thumbwheel on
>
OwnersManuals2.com