Audi A3 2024 - Power Windows

8v0012721BE
Opening and closing
Vehicles with @ button
Applies to: vehicles with power child safety locks
> To activate and deactivate the child safety lock
(door handle and power window switch) for the
a rear door, press the left or right @ button in
the driver's door @ that corresponds to that
rear door © fig. 34. The LED in the button will
turn on or off.
> Make sure the child safety lock is working by
checking the function on the rear power win-
dow switch and door handle.
Vehicles with 4 button
Applies to: vehicles with manual child safety locks
> To activate or deactivate the child safety lock
for the power window switch in the rear doors,
press the utton in the driver's door @)
© fig. 34, The LED in the button will turn on or
off.
> To activate or deactivate the manual child safe-
ty lock for the rear door handle, open the re-
spective rear door and turn the key switch with
the mechanical key in the direction of the arrow
or opposite the direction of the arrow © fig. 35.
This will disable the function of the rear door
handle.
» Make sure the child safety lock is working by
checking the function on the rear power win-
dow switch and door handle.
When the child safety lock is switched on, the
following functions are disabled:
= The rear inner door handles
~The rear power windows
Message in the instrument cluster display
The following messages may appear depending
on the vehicle equipment:
@®/ Child safety lock: malfunction! Please
contact Service
There is a malfunction in the child safety lock.
Press the @/ G button again.
If the message stays on, drive immediately to an,
authorized Audi dealer or authorized Audi Service
Facility to have the malfunction repaired.
— Observe the safety precautions © page 36.
~Amalfunction in the child safety lock could
allow
the rear doors to be opened from the
inside, which increases the risk of an acci-
dent.
Power windows
Opening and closing the windows
RAZ-0581
Fig. 36 Driver's door: power window switch
Power window switches:
@ Left front door
@® Right front door
© Left rear door
@ Right rear door
Opening and closing the windows
All power window switches are equipped with a
two-stage function:
» To open or close the window completely, press
the switch down or pull the switch up briefly to.
the second level. The operation will stop if the
switch is pressed or pulled again.
» To select a position in between opened and
closed, press or pull the switch to the first level,
until the desired window position is reached.
Correcting a malfunction in the one-touch
up/down function
If necessary, you can reactivate the one-touch up/
down function if it malfunctions.
» Pull the power window switch up until the win-
dow is completely raised.
» Release the switch and pull it up again for at
least one second.
47
OwnersManuals2.com