Audi A3 2024 - Digital Compass

8Y0012721BE
Lights and vision
The light/rain sensor is malfunctioning. You can
still control all functions that are not controlled
by the rain sensor using the windshield wiper lev-
er. Drive immediately to an authorized Audi deal-
er or authorized Audi Service Facility to have the
malfunction repaired.
Digital compass
Switching the compass on and off
Applies to: vehicles wi
Fig. 47 Rearview mirror: digital compass is switched on
>
To
turn
the
compass
on
or
off,
press
the
button
@ until the compass display in the mirror turns
on or off.
The digital compass only works when the ignition
is turned on. The directions are indicated with ab-
breviations:
N
(north),
NE
(northeast),
E
(east),
SE (southeast), S (south), SW (southwest), W
(west), NW (northwest).
To prevent inaccurate compass readings, do
not bring any remote controls, electrical devi-
ces or metallic objects near the mirror.
Adjusting the magnetic zone
Applies to: vehicles with digital compass
Fig. 48 Magneticzone map
The
magnetic
zone
must
be
adjusted
correctly
for
the
compass
to
read
accurately.
>
Press
and
hold
the
button
@
page
61,
fig.
47
until
the
number
of
the
magnetic
zone
appears
in
the
interior
rearview
mirror.
»
Press
the
button
(®)
repeatedly
to
select
the
correct
magnetic
zone.
The
selection
mode
turns
off
after
a
few
seconds.
Calibrating the compass
Applies to: vehicles with digital compass
If
the
display
is
incorrect
or
inaccurate,
the
com-
pass
must
be
recalibrated.
> Press and hold the button @) until aC
>
page
61,
fig.
47
appears
in
the
rearview
mir-
ror.
> Drive in a circle at about 6 mph (10 km/h) until
a direction is displayed in the rearview mirror.
To reduce the risk to yourself and other road
users, calibrate the compass in an area where
there is no traffic.
61
OwnersManuals2.com