Audi A4 - Engine Compartment Layout

Checking and topping up fluids256
Closing the bonnet
– To close the bonnet, pull it down to overcome the spring
pressure.
– Then let it drop into the catches; do not press down ⇒ .
WARNING
• For safety reasons the bonnet must always be completely
closed when the vehicle is moving. After closing it always check
that it is properly secured. The bonnet must be flush with the adja-
cent body panels.
• Should you notice that the bonnet is not safely secured when
the vehicle is moving, stop the vehicle immediately and close the
bonnet properly, otherwise it could cause an accident.
Engine compartment layout
Engine compartment layout
Main components for checking and refilling
Fig. 252 Typical locations of fluid containers, engine oil dipstick and engine oil
filler cap
Jump-start terminal (+) under a cover . . . . . . . . . . . . .
Brake fluid reservoir () . . . . . . . . . . . . . . . . . . . . . . . .
Engine oil filler cap () . . . . . . . . . . . . . . . . . . . . . . . .
Engine oil dipstick* (orange) . . . . . . . . . . . . . . . . . . . . .
Radiator expansion tank () . . . . . . . . . . . . . . . . . . . . .
Jump-start terminal (-) with hexagon head . . . . . . . . .
Windscreen washer container () . . . . . . . . . . . . . . . .
Hydraulic fluid reservoir for power steering . . . . . . . .
A
1
265, 294
A
2
262
A
3
259
A
4
258
A
5
261
A
6
265, 294
A
7
267
A
8
225
document_0900452a81b1b9de.book Seite 256 Donnerstag, 26. Juli 2007 9:16 09