Doors and windows 45
Controls Safety Driving tips General maintenance Self-help Technical data
Replacing the battery for the remote control
key
– Press the release button ⇒ fig. 32.
– Pull the emergency key out of the remote control key.
– Press the release catch ⇒ fig. 33 on the battery carrier
and at the same time pull the battery carrier out of the
remote control key in the direction of the arrow.
– Insert the new CR 2032 battery with the “+” symbol
facing downwards.
– Slide the battery carrier carefully into the remote control
key.
– Insert the emergency key.
For the sake of the environment
Used batteries must be disposed of appropriately and must not be
discarded with ordinary household waste.
Note
The new battery must be of the same type as the original one
(CR 2032).
Removing the emergency key
– Press the release button ⇒ fig. 34.
– Pull the emergency key out of the remote control key.
You can use the emergency key to ...
• activate and deactivate* the front passenger's airbag
⇒ page 208.
• lock and unlock* the glove box ⇒ page 90.
• lock and unlock the lockable rear seat.
• manually lock and unlock the vehicle if this is not possible using
the remote control key ⇒ page 48.
Fig. 32 Remote control
key: Removing the
emergency key
Fig. 33 Remote control
key: Removing the
battery carrier