The washer fluid container is marked with the
symbol~ on its cap
¢ fig . 194, ¢ page 226,
fig. 188 .
.,. Before you check anyth ing in the engine
compartment,
always read and heed all
WARNINGS ¢ A in Working in the engine
compartment on page 224 .
.,. Lift the filler cap tongue to add washer flu-
id. You can fill the container to the top .
.,. Press the cap back onto the filler neck after
filling the container .
You can find the reservoir
capacity in the table
in
¢ page 281.
Clean water should be used when filling up. If
possible, use soft water to prevent scaling on
washer jets. Always add a glass cleaner solu-
tion (with frost protection in the winter).
CJ) Note
Do not mix engine coolant antifreeze or
any other add itives to fill up the wind-
shield washer reservoir.
Checkin g and fillin g 239
•
•
To Next Page
Loading...
