EasyManua.ls Logo

Audi A6 2014 - Mirrors

Audi A6 2014
304 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50 Clear v ision
- To help prevent damage to the wiper
arms or other components, do not at-
tempt to move the wipers by hand.
@ Tips
- Commercial hot waxes applied by auto -
matic car washes affect the cleanability
of the windshield .
- You can also use the service position, for
example, if you want to protect the
windshield from icing by using a cover.
- You cannot activate the service position
when the hood is open.
Mirrors
Adjusting the exterior mirrors
Fig. 45 Forward section of driver's armr est: power mir-
ror controls
Turn the knob to the desired position :
Q/P - In t his position, you can adjust the
driver's and front passenger's exter ior mirrors
by turning the knob in the desired direction.
Ciiil-The mirrors are heated depending on the
outside temperature.
8 - The exterior mirrors fo ld in. In the MMI,
you can select if the mirrors fold in automati-
cally when you lock the vehicle c> page 35 .
Tilt function for the passenger's mirror
To help you see the curb when backing into a
parking space, the surface of the mirror tilts
slightly . The knob must be in the P position
for this to happen .
You can adjust the tilted mirror surface by
turning the knob in the desired direction .
When you move out of reverse and into anoth-
er gear, t he new mirror position is sto red and
assigned to the key you are using.
The mirror goes back into its orig inal position
once you drive forward fast er than 9 mph (15
km/h) or switch the ignition off .
A WARNING
- Curved (i.e . convex) mirror surfaces in-
crease your fie ld of view. Remember that
vehicles or other objects will appear
smaller and farther away t han when seen
in a flat mirror . If you use th is m irror to
estimate distances of following vehicles
when changing lanes, you could estimate
incor rectly and cause an accident.
(D Note
-
- If the m irror housing is moved uninten-
tionally (for examp le, while parking your
vehicle), then you must first fold the mir-
ror electrically. Do not readjust the mir-
ror housing manually. You could damage
the motor which controls the mirror.
- If you wash t he vehicle in an automatic
car wash, you must fo ld the ext erior mir-
rors in to reduce the risk of damage to
the mir rors. Never fold power folding ex-
terior mirrors * by hand. Only fo ld them
in and out using the power controls.
@ Tips
- The exterior mirror settings are stored
w ith the memory function* ¢ page
56.
- If there is a malfunction in the electrical
system, you can sti ll adjust the exterior
mirrors by pressing the edge of the mir-
ror.

Table of Contents

Related product manuals