Driver information system
Operation
The driver information system is operated using
the buttons on the multifunction steering wheel.
Fig. 6 Multifunction steering wheel: operating the driver
infor matio n system
Fig. 7 Instr umen t cluster: open ing the vehicle funct ions
menu
Operating
• Switch the ignition on.
• To switch between the tabs, press the rocker
switch @ to the left or right Q fig. 6.
• To access additional information below or
above, turn the thumbwheel @ down or up.
• To confirm a selection, press the thumbwheel
@.
• To open the submenu for an active t ab, press
the button
l:il @.
• To se lect a function programmed to a stee ring
wheel butto n*, press the button @ .
Opening the Vehicle functions
• Se lect the f irst tab with the rocke r switch @ .
• Press the
[ii button @. The Vehicle functions
menu is displayed Q fig. 7.
• To select a menu item, turn and press the
th umbwheel @ .
20
Resetting values to zero
• In the Vehicle functions menu, select On-
board computer or Efficiency program.
• You can now select between the long-t erm
memory and short-term memory .
• To reset the values in a memory, press and hold
the thumbwheel @ for one second.
Assigning a function to a programmable
steering wheel button*
.,. Select the I CAR ! function button > (Car)*Sys-
tems
contro l button > Vehicle settings > Steer-
ing wheel button programming .
The last function selected disp lays when you
switch the ign ition on.
On-board computer
Fig. 8 Instrument cluster: fu el consu mptio n display
You can call up the following informat ion in the
on -bo ard computer:
- Date
- Driving t ime from the short-term memory
- Average consumption from the short-te rm
memory
- Average speed from the short-term memory
- Distance driven from the short-term memory
- Current fuel consumption
- Short-term memory overv iew
- Long-te rm memory overv iew
The short-term memory collects driving informa -
tion from the time the ignition is switched on un-
til it is switched off . If you continue driving with-
in two hours after switching the ignition off, the
new values are included when calculating the cur-
rent trip information.
Ill>
To Next Page
Loading...
