EasyManua.ls Logo

Audi A6 2018 - Replacing Windshield Wiper Blades

Audi A6 2018
266 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
a
co
....
N
"
N
....
0
0
\.J
'<t
@, the headlights and the night vision assist
camera* are cleaned at intervals .
A WARNING
- The rain sensor is only intended to assist the
dr iver. The driver may still be responsible
for manually switching the w ipers on based
on visibility conditions.
- The windshie ld may not be treated with wa-
ter-repell ing windsh ield coating agents . Un-
favorable cond itions, such as wetness, dark-
ness or low sun, can result in increased
glare, wh ich increases the risk of an acci-
dent . W iper blade chatter is also possible.
- Properly funct ion ing windsh ield wiper
blades are required fo r a clear view and safe
dr iving¢
page 45, Replacing windshield
wiper blades.
0 Note
- If there is frost, make sure the windsh ield
wipe r blades are not fro zen to the wind-
shield. Switch ing on t he win dshield wipe rs
when the blades are frozen to the wind-
shield can damage t he wiper blades.
- The w indshield wipe r system must be
swit ched off (lever in position 0) befo re us-
ing a car wash. This prevents the wipers
from switching on unintentionally and caus-
ing damage to the windshie ld w iper system.
(D Tips
- The windshield wipers switch off when the
ignition is switched off . You can activate the
windsh ield wipers after the ign it ion is
switched back on by moving the winds hield
wiper lever to any posit ion.
- Wo rn or dirty windshield wipe r blades result
in streak ing. This can affect the rain sensor
funct ion. Check your windsh ield wiper
blades regu larly .
- The washer fluid nozzles fo r t he windshie ld
washer system are heated at low tempera-
tures when the ignition is on .
- When stopp ing temporarily, such as at a
traffic light, the speed of the windsh ield
wipe rs automat ically reduces by one level.
Light s and Vis ion
Cleaning windshield wiper blades
Clean t he wiper blades when you see w iper
st reaks. Use a soft clot h and a glass cleaner.
"" Place t he windsh ield w iper arms in the service
position ¢
page 45 .
"" Fold t he windsh ield wiper arms away from t he
w indshie ld.
A WARNING
~
-
Dirty windshie ld w iper blades can impa ir vi-
sion, w hich increases the risk of an accident .
Replacing windshield wiper blades
Fig. 48 Rem oving windshield wiper blades
Windshield wiper service position / blade
replacem ent posit ion
-
-
M
0
:i:
<f
m
""Switch the igniti on off and move t he w indshield
wiper lever to position @ briefly ¢
page 44,
fig. 47.
The windshield wipers move into the
service position .
""To br ing the windshie ld w ipers back to the nor-
mal position, switch the ignition on and hold
the windshield wiper lever in position @ unt il
the wi ndshield wipers go back to the normal
position , or drive faster than 8 mph (12 km/ h).
You can also turn the service posit ion on or off in
the Infotainment system:
""Switch the windsh ield w ipers off (posit ion @
¢ page 44, fig. 47) .
"" Select: the I CAR ! f unct ion button > (Car)* Sys-
tem s
contro l butt on > Service & control > Wip -
er change position.
> On/ Off IJJ,-
45

Table of Contents

Related product manuals