a
co
,...,
N
"
N
,...,
0
0
<..:l
'<I"
@ Indicator lights
• - Adaptive cru ise control is switched on . No
objects are detected ahead. The stored speed is
maintained .
• - An object a head was de t ected. The adap t ive
cr uise control system regula t es the speed and
d istance to the object ahead and acce lerates/
brakes a utomatically.
r-j-Adaptive cru ise con t rol is switched on . An
object ahead was detec t ed . Your vehicle rema ins
stopped and will not st art dr iving automat ica lly.
• - The automatic brak ing is no t enough to
main t ain a sufficient distance to a n object ahead.
You must inte rvene ¢
page 91, Reques t for
driver intervention.
© Instrument cluster display
If adaptive cruise control is not shown in the in-
strument cluster disp lay, yo u can call it up using
the mu ltifu nction stee ring wheel buttons
¢ page 19.
Based on the graphics in the d isp lay, you can de-
termine if the system is ma inta ining a distance to
the object ahead and what that distance is.
No vehicle - no object was detected ahead .
White vehicle - an object was detected ahead.
Red vehicle - request for driver intervention
¢ page 91 .
Both arrows on t he scale © indi cate the dis t ance
to the object a head . No ar row appea rs when t he
vehicle is on an open road and there is no object
ahead. If an object is detected ahead, the arrow
moves on the scale.
The green zone on the sca le ind icates t he st ore
d ista nce . For information on changing the dis -
tance, refer to
~ page 90. If the distance se -
lect ed is exce eded or not reached, th e a rrow
moves into the red zone on the scale.
A WARNING
If you press the ISETI button when d riving at
speeds below 20 mph (30 km/h), the vehicle
accelerates automat ically up to 20 mph (30
A s si s t a nce systems
km/h), wh ich is the minim um speed that can
be set .
(D Tips
- If you switch the ignit ion or the adaptive
cruise control system off, the set speed is
erased fo r safety reasons .
- The e lectronic stabilization control (ESC)
and the anti -slip -regulation (ASR) are auto-
matically switched on when the adaptive
cruise cont rol is switched on.
Changing the speed
Applies to: vehicles with Audi adaptive cruise control
0
f
•
0
Fig. 94 Operating lever : chang ing t he sp eed
.,. To increase or reduce the speed in increments,
tap the lever up or down.
.,. To increase or decrease the speed quick ly,
hold
the lever up or down until the red LED@ reach-
es the des ired speed ¢
page 88, fig . 93.
After each change, the new sto red speed appears
briefly in the information line ¢
page 88, fig. 93
@.
Driving in stop-and-go traffic
Applies to: vehicles with Audi adapt ive cru ise control
The adaptive cru ise control system also assists
you in stop-and-go traffic .
Stopping automatically
If an object ahead stops, your vehicle will brake
and stay at a stop, within the limits of t he sys-
tem . The Sta rt/Stop system* can be used as usu -
al. ..,_
89
To Next Page
Loading...
