Audi Q3 2016 - Audi connect Services; Wi-Fi Configuration; Google Voice Local Search

Audi connect®
Wi-Fi Configuration
Audi connect can provide you with Google Earth ™ ,
Google Voice ™ Local Search, Wi-Fi Hotspot, Online
Services (fuel prices, weather information, travel
information, personalized feeds and more) and
myAudi Destinations*.
Learn more about
Audi connect Configuration
TEXT Q3CONNECT16A
to 38981
Learn more about
Audi connect Features
TEXT Q3C0NNECT16B
to 38981
1. Ensure SIM card (provided by dealer) is present
in the SIM slot.
Do not text and drive.
Message and data rates may apply.
2. Press the TEL function button.
3. Press the Settings control button.
4. Select Wi-Fi settings.
5. Then, select Wi-Fi active and choose Visible.
6. Select a password that is at least eight
characters long. The default password can be
used. Or a new password can be entered.
Most devices use encryption type WPA2 as the default.
7. Select Apply settings to save your password.
8. On your device, search for Wi-Fi networks, select
SSID and enter your password to establish a
connection.
You may connect up to eight wireless devices at one time.
To continue with Data Configuration
9. Press the BACK button, scroll to Data connection
and select.
End call iPhone Dial L
Network connection Wi-Fi settings
/ Wi-Fi active
▼ Visible
/ Network ID (SSID)
Audi09957
Encryption type
▼ WPA2
i Password
24689752
\ Apply settings
AT&T_\ Settings
10. Select Without request. Press the BACK button
to exit.
Google Voice ™ Local Search
1. Press the TALK button on the steering wheel.
2. Say “Online Destinations" or "Google Search"
followed by a keyword (e.g., bookstore,
museum, pizza, etc.).
3. Make your selection from the displayed list:
► By speaking the line number.
► Or saying "Next page" to view additional
results.
4. After the beep, say "Start route guidance" to
start the navigation to your destination.
Learn more about
Audi MMI: Navigation
TEXT Q3NAV16B
to 38981
Do not text and drive.
Message and data rates may apply.
•Always pay careful attention to the road and do not drive while distracted. Audi connect features and technologies are optional, may require an
additional subscription with separate terms and conditions, and should be used only when it is safe and appropriate. The Wi-Fi feature is intended
for passenger use only. Audi connect services are only available where there is mobile network coverage. You can obtain more information from
your current service provider. Vehicle must be stationary with the parking brake engaged while performing this operation. Cellular connectivity is
dependent on available cellular signal. Enter destinations while vehicle is stationary and away from traffic. This feature is available on select trim lines.
Note:
Refer to your Owner’s Manual for additional commands. Cellular connectivity is dependent on available cellular signal.
Important Safety Instructions and Warnings: Audi connect®
► To reduce the risk of an accident, only use Audi connect services when road and traffic conditions permit.
► Use the Audi connect services with a Wi-Fi hotspot only in the rear seat when the vehicle is in motion or only when the vehicle is stationary to reduce the
risk of an accident.
► As the driver, do not allow usage of the Wi-Fi hotspot to distract you from driving, as this could increase the risk of an accident.
► It is only safe to use laptops and similar mobile devices when the vehicle is stationary because, like all loose objects, they could be thrown around the
inside of the vehicle in a crash and cause serious injuries. Store these types of devices securely while driving.
► Do not use any wireless devices on the front seats within range of the airbags while driving.
► Read and follow the safety precautions in the separate vehicle owner’s manual under "Important information about the front airbag system" in the
"Airbag System" chapter.
Audi connect®