Audi Q3 2016 - Climate Control System; AUTO Setting and Zone Synchronization; Setting Temperature; Heated Seats Function

Climate Control
3-Zone Climate Control
1. AUTO Setting
The AUTO setting of your Climate Control
System will help the cabin maintain your
selected temperature by regulating the
temperature, fan speed and airflow. Once
activated, there is no need to alter the settings.
When AUTO is selected, A/C will come on
automatically to condition the air.
Synchronize Zones
Press and hold the AUTO button to synchronize
both sides to the same temperature, fan speed
and airflow. Synchronization is deactivated once
the passenger temperature is changed.
2. Set Temperature
Temperature can be operated independently for
each side of the cabin.
► To increase or decrease the temperature by one
degree, press the toggle switch either one click
left or one click right.
► To increase or decrease the temperature in
larger increments, press and hold the toggle
switch until the desired temperature is reached.
Learn more about
Climate Control
TEXT Q3CLIMATE16A
to 38981
Do not text and drive.
Message and data rates may apply.
\
\a
3. Heated Seats
To warm up more quickly on a cool morning, turn
on your heated seats.
4. Fan Speed
Fan speed is the same for both zones. Fan speed
can be adjusted by pressing the small fan or big
fan icon buttons.
Recirculation
The recirculation function helps prevent outside
air and odors from entering the cabin. It may also
be used in conjunction with to cool the cabin more
quickly.
To switch on air recirculation mode:
EALE^ E-PPOCESS
► Press the recirculation button; the bottom LED
light will illuminate.
► To turn on the automatic recirculation mode,
press the button again; the top LED button will
illuminate.
Auto recirculation:
► The air quality sensor detects outside air
pollutants and switches on automatically.
► Air recirculation switches on automatically
when you reverse the vehicle while the engine
is cold.
6. Airflow
Direct airflow to defrost, panel and floor vents or
a combination by selecting the appropriate airflow
button(s).
Important Safety Instructions and Warnings: Climate Control
► Reduced visibility is dangerous and can cause accidents.
► For safe driving it is very important that all windows be free of ice, snow and condensation.
► Completely familiarize yourself with the proper use and function of the heating and ventilation system and especially how to defog and defrost the
windows.
► Never use the windshield wiper/washer system in freezing weather until you have warmed the windshield first, using the heating and ventilation
system. The washer solution may freeze on the windshield and reduce visibility.
► You should not use the recirculation mode for an extended period since no fresh air is drawn in. With the air-conditioning switched off, the windows can
fog up, which increases the risk of an accident.
► Individuals with reduced sensitivity to pain or temperature could develop burns when using the seat heating function. To reduce the risk of injury, these
individuals should not use seat heating.
Climate Control