Audio Technica AT-SP3X User Manual

7
Preparation before use
Installation of speakers
• Before installing this product, place a scratch prevention sticker on the bottom of the speaker.
• When installing this product, place it on a level surface.
• Install the product in such a way that the left and right sides of the product are not mistaken.
Connecting speakers
Connect speakers (L/R) to each other using speaker cables.
1
Remove the covers from both ends of the supplied speaker cable.
2
Lower the tabs on the speaker cable terminals on the back of the speaker and insert the speaker
cable.
• Match the polarity of the speaker cable terminals (red terminals are for the right channel and black
terminals are for the left channel) and connect the speakers (L/R) to each other.
Attach the conversion plug to the AC adapter
Attach a conversion plug to the AC adapter according to the shape of the outlet you are using.
1
Select a conversion plug according to the outlet you are using.
2
Align the lower tabs of the conversion plug with the recesses on the AC adapter body and install
it.
3
Slide the conversion plug until it clicks into place and attach it to the AC adapter.
Remove the conversion plug
1
While pressing the PUSH button, slide and remove the conversion plug.

Audio Technica AT-SP3X Specifications

General

Brand	Audio Technica
Model	AT-SP3X
Category	Speakers
Language	English