10
Cleaning
Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint
thinners or other solvents for cleaning purposes.
• To clean, wipe with a dry cloth.
• Natural oils from the skin are particularly likely to build up on the areas where the
eartips attach to the headphones (see figure at right). If these areas are not cleaned,
the eartips can become detached. Clean them regularly. Do not touch the areas
where sound is produced as they are delicate. Doing so may result in malfunction.
• Wipe away any perspiration or dirt from the cable with a dry cloth immediately after
use. Failure to clean the cable may cause it to deteriorate and harden over time,
resulting in malfunction.
• Wipe the cable's USB plug with a dry cloth if dirty.
• Clean the eartips by removing them from the headphones and manually cleaning
them with a diluted mild detergent. After cleaning, dry before using again.
• If the product will not be used for an extended period of time, store it in a well-ventilated place free from high
temperatures and humidity.
Eartip attachment
part
Sound
reproduction
part
To Next Page
Loading...
Need help?
General
