EasyManua.ls Logo

Audio Technica ATH-CKR35BT

Audio Technica ATH-CKR35BT
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Headphones
Type
Dynamic
Driver
9.8 mm
Sensitivity
102 dB/mW
Frequency response
5 to 24,000 Hz
Impedance
16 ohms
Microphone
Type
Electret condenser
Polar pattern
Omnidirectional
Sensitivity
-44 dB (1 V/Pa, at 1 kHz)
Frequency response
100 to 10,000 Hz
Communication specifications
Communication system
Bluetooth version 4.1
RF output
0.4 mW EIRP
Maximum communication range
Line of sight - approx. 10 m (33')
Frequency band
2.402 GHz to 2.480 GHz
Modulation method
FHSS
Compatible Bluetooth profiles
A2DP, AVRCP, HFP, HSP
Support codec
AAC, SBC
Supported content protection method
SCMS-T
Transmission band
20 to 20,000 Hz
Other
Power supply
DC 3.7 V lithium polymer battery
Charging time
Approx. 3 hours*
Operating time
Continuous transmission time (music playback): Max. approx. 7 hours*
Continuous standby time: Max. approx. 200 hours*
Weight
15.5 g (0.55 oz)
Operating temperature
5°C to 40°C (41° F to 104°F)
Included accessories
USB charging cable (30 cm (1') USB Type A / Micro USB Type B)
Eartips (XS, S, M, L)
• Clip
• Pouch
Sold separately
• Eartips
* The above figures depend on operating conditions.
For product improvement, the product is subject to modification without notice.
The Bluetooth
®
word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is
under license. All other trademarks are property of their respective owners.
AAC” logo is a trademark of Dolby Laboratories.
Specifications

Related product manuals