10
Using the product
Auto power o function
Reset function
The product automatically turns off after 5 minutes of not being connected to the transceiver that has its power turned
on.
If the product does not work or other malfunctions occur, refer to
“Charging the battery” (p. 6) for information on inserting the
USB charging cable to provide power, and then do a reset.
Disconnecting and then reconnecting the USB charging cable
will reset the product and should resolve any problem you are
experiencing. If the problem persists, contact your local Audio-
Technica dealer. Resetting does not change any of your settings
(pairing information, volume setting, etc.).
Battery jack
Micro USB Type-B
To Next Page
Loading...
