20
Cleaning
Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint
thinners, or other solvents for cleaning purposes.
Use a dry cloth to clean the headphones.
To clean the earpads and headband, wipe with a dry cloth. Earpads and headband may fade if sweat or water dries
on them. If the earpads and headband get wet, we recommend wiping them with a dry cloth and allowing them to
dry in the shade.
Immediately wipe off any moisture such as sweat from operating areas such as the buttons. Failure to do so may
result in a malfunction due to corrosion.
Wipe away any perspiration or dirt from the cable with a dry cloth immediately after use. Failure to clean the cable
may cause it to deteriorate and harden over time, resulting in malfunction.
Wipe the cable’s USB plug with a dry cloth if dirty.
Wipe the cable’s plug with a dry cloth if dirty. Failure to clean the plug may cause sound skipping or noise.
If the product will not be used for an extended period of time, store it in a well-ventilated place free from
high temperatures and humidity.
Earpads are consumable parts. The earpads deteriorate over time due to use or storage. Contact your local
Audio-Technica dealer for earpads replacement or other repairs.
To Next Page
Loading...
Need help?
General
