Need help?Do you have a question about the Audio Technica ATH-M20xBT and is the answer not in the manual?
General| Product type | Headset |
|---|---|
| Product color | Black |
| Wearing style | Head-band |
| Control unit type | On-ear control unit |
| Recommended usage | Music |
| Microphone type | Built-in |
| Microphone frequency | 50 - 20000 Hz |
| Microphone sensitivity | -42 dB |
| Microphone direction type | Omnidirectional |
| Impedance | 36 Ω |
| Driver unit | 40 mm |
| Ear coupling | Supraaural |
| Maximum input power | 100 mW |
| Battery type | Built-in battery |
| Battery voltage | 3.7 V |
| Battery operated | Yes |
| Battery recharge time | 4 h |
| Continuous audio playback time | 60 h |
| Operating temperature (T-T) | 5 - 40 °C |
| Quantity | 1 |
| Cables included | Audio (3.5mm), USB Type-A to USB Type-C |
| Bluetooth version | 5.0 |
| Bluetooth profiles | A2DP, AAC, AVRCP, HFP, HSP, SBC |
| Connectivity technology | Wired & Wireless |
Weight and Dimensions| Weight | 216 g |
|---|
Summarizes precautions for product usage, avoiding damage, and electrical hazards.
Details safety measures related to the built-in rechargeable battery to prevent leakage or explosion.
Important compliance information from the FCC regarding device operation and potential interference.
Details compliance with FCC radiation exposure limits for uncontrolled environments.
Provides contact information for Audio-Technica U.S., Inc.
Outlines compliance with Innovation, Science and Economic Development Canada's regulations and exposure limits.
Provides important tips and precautions for optimal product performance and user safety during general use.
Identifies and describes the various parts of the headphones, including indicators and physical components.
Details the location of controls, ports, and lists the included accessories with their descriptions.
Step-by-step instructions on how to connect the USB cable and charge the product's battery.
Explains the process of powering the product on and off using the power supply/control button.
Guides users through the process of pairing the headphones with a Bluetooth-enabled device.
Describes the simplified Bluetooth pairing process for Android devices using Fast Pair technology.
Explains how to connect two Bluetooth devices simultaneously for multipoint audio management.
Instructions on how to connect, play music, and control volume using Bluetooth.
Details how to make, receive, and end calls, and adjust volume during phone conversations.
Explains how to enable and use low latency mode for reduced audio delay during gaming or video.
Describes how to use the headphones with a wired connection when the battery is depleted.
Explains the automatic shutdown feature to conserve battery life when not in use.
Shows indicator lamp patterns for device pairing status like searching and connecting.
Displays indicator lamp patterns for connection states like waiting, connected, and music playback.
Illustrates indicator lamp behavior for low battery status.
Shows indicator lamp status during charging, completion, and error conditions.
Lists various situations and the corresponding English voice guidance messages provided by the product.
Provides guidance on how to clean the headphones using dry cloths to maintain them.
Explains how to force the product into pairing mode when connection issues occur.
Details the steps to reset the product to its factory default settings to resolve operational anomalies.
Addresses problems with power supply and Bluetooth pairing failures.
Solutions for no sound, faint sound, distortion, noise, sound cutting out, and low caller volume.
Troubleshooting steps if the product is not charging correctly.
Technical specifications for the headphone drivers and microphone.
Details on Bluetooth version, range, frequency band, and codecs.
Information on power supply, charging time, operating time, weight, and operating temperature.
Lists included accessories and items available for separate purchase.
To Next Page