Audio Technica ATH-M20xBT User Manual

Using the product
17
1
Press the power supply / control button three times in a row.
With every three presses, the voice guidance will play the message “Low latency mode” or “Low
latency mode off”, and low latency mode will be switched ON/OFF.
Low latency mode cannot be switched ON/OFF during a call or during voice input using the speech
recognition feature.
Wired connection (playthrough function)
The product has a playthrough that allows you to use it as portable headphones and play back music even when there is
no battery power. You can connect the connector plug of the included cable to the product’s connector jack, and then
connect the input plug into a portable audio player. The buttons on the headphone cannot be used for operation when
using a wired connection.
2 3 41
1
Smartphone, portable audio player, etc.
2
Input plug
3
Connector plug
4
Connector jack
Auto power off function
The product automatically turns off after 5 minutes of not being connected to a device. The product also automatically
turns off after 5 minutes in the “Waiting to be connected” status.

Audio Technica ATH-M20xBT Specifications

General

Product type	Headset
Product color	Black
Wearing style	Head-band
Control unit type	On-ear control unit
Recommended usage	Music
Microphone type	Built-in
Microphone frequency	50 - 20000 Hz
Microphone sensitivity	-42 dB
Microphone direction type	Omnidirectional
Impedance	36 Ω
Driver unit	40 mm
Ear coupling	Supraaural
Maximum input power	100 mW
Battery type	Built-in battery
Battery voltage	3.7 V
Battery operated	Yes
Battery recharge time	4 h
Continuous audio playback time	60 h
Operating temperature (T-T)	5 - 40 °C
Quantity	1
Cables included	Audio (3.5mm), USB Type-A to USB Type-C
Bluetooth version	5.0
Bluetooth profiles	A2DP, AAC, AVRCP, HFP, HSP, SBC
Connectivity technology	Wired & Wireless

Weight and Dimensions

Weight	216 g