Need help?Do you have a question about the Audio Technica ATH-TWX7 and is the answer not in the manual?
General| Bluetooth | Yes |
|---|---|
| Frequency band | 2.402 - 2.480 GHz |
| Bluetooth version | 5.1 |
| Bluetooth profiles | A2DP, AAC, LDAC, SBC |
| Connectivity technology | True Wireless Stereo (TWS) |
| Operating temperature (T-T) | 5 - 40 °C |
| Microphone type | Built-in |
| Microphone sensitivity | -38 dB |
| Microphone direction type | Omnidirectional |
| Impedance | 16 Ω |
| Driver type | Dynamic |
| Driver unit | 5.8 mm |
| Ear coupling | Intraaural |
| Number of drivers | 2 |
| Headphone frequency | 10 - 40000 Hz |
| Maximum input power | 12 mW |
| Noise canceling type | V-Hybrid |
| Headphone sensitivity | 100 dB |
| Intraaural headphones type | Earbuds |
| Cables included | USB Type-A to USB Type-C |
| Charging case type | Wired & Wireless |
| Charging case connector type | USB Type-C |
| Battery type | Built-in battery |
| Charging source | USB, Wireless |
| Battery recharge time | 1.5 h |
| Input voltage (earpieces) | 3.85 V |
| Continuous audio playback time | 6.5 h |
| Battery recharge time (charging case) | 3 h |
| Continuous audio playback time (without ANC) | 7.5 h |
| Continuous audio playback time (with charging case) | 20 h |
| Continuous audio playback time (with charging case/without ANC) | 24 h |
| Control type | Touch |
| Headset type | Binaural |
| Product type | Headset |
| Product color | Gray |
| Wearing style | In-ear |
| Operating keys | Mute |
| Control unit type | On-ear control unit |
| Recommended usage | Calls/Music |
| Protection features | Rain proof, Splash proof |
| International Protection (IP) code | IPX4 |
Weight and Dimensions| Charging case weight | 47.5 g |
|---|---|
| Left earpiece weight | 4.7 g |
Safety warnings and precautions for using the headphones, including medical equipment and environmental factors.
Safety warnings and precautions specific to handling and using the charging case.
Precautions for the built-in rechargeable battery to avoid leakage, heat, or explosion.
Steps for charging both the headphones and the charging case using a USB cable.
How to charge the headphones using the power stored in the charging case.
Step-by-step guide for pairing the headphones with a Bluetooth-enabled device.
Instructions on how to play music and control playback using the headphones.
Instructions on how to make and receive phone calls using the headphones.
Procedure to force pair the product when standard pairing fails.
Procedure to reset the product to its factory default settings.
Solutions for when the product is not receiving power or turning on.
Troubleshooting steps for issues related to Bluetooth pairing.
Solutions for no sound, faint sound, or sound from only one headphone.
Troubleshooting for distorted, noisy, or cutting-out audio.
To Next Page