Audio Technica ATH-SR5BT User Manual

English
Cleaning
Get into the habit
of
regularly cleaning
the product to ensure that it
will last
for a
long
time. Do not use
alcohol,
paint thinners or other
solvents for cleaning
purposes.
• Use a dry
cloth
to
clean
the headphones and the
in-line controller.
•
After using the included cable, clean
it
with
a dry
cloth
if sweat or dirt
is
present.
Failure
to
clean
the
cable
may cause it to deteriorate
an_d
harden over time,
resulting
in
malfunction.
•
Wipe the plugs on
included cables
with
a dry
cloth
if dirty. Using the
plug
without
cleaning
it
can
cause
sound skipping or distortion.
•
To
clean
the earpads and headband,
wipe
with
a dry
cloth. Earpads and headband may fade if
sweat
or water dries on them.
If
the earpads and headband
get
wet,
we
recommend wiping them
with
a dry
cloth
and
allowing
them
to
dry
in
the shade.
•
For
long-time
storage, keep the product
in
a
well-ventilated place
free from high temperatures and
humidity.
•
Earpads
will deteriorate over
time
due
to
use and storage.
Replace
when
necessary.
For
information
about replacing
earpads or other parts, or for information about other
serviceable
parts, contact your
local
Audio-Technica
dealer.
11

Audio Technica ATH-SR5BT Specifications

Communication Specifications

Bluetooth version	4.1
Bluetooth power class	Class 2
Maximum communication range	10 m
Frequency band	2.402 GHz to 2.480 GHz

Headphones Component

Driver size	45 mm
Output sound pressure level	100 dB/mW
Frequency response	5 to 40, 000 Hz
Impedance	35 ohms

Microphone Component

Type	Electret condenser
Sensitivity	-40 dB (1 V/Pa, at 1 KHz)
Frequency response	50 to 4, 000 Hz

Power and Battery

Power supply	DC 3.7 V lithium polymer battery
Charging time	Approx. 4 hours
Operating time	Approx. 15 hours

Weight and Dimensions

Weight	Approx. 170 g
Operating temperature	5°C to 40°C
Headphones cable length	1.2 m