Page | 8
9. Enabling or Disabling Wi-Fi
To enable Wi-Fi:
1. Turn Wi-Fi on by moving the switch in the upper right corner (Wi-Fi is disabled by default).
2. After enabling Wi-Fi, "Searching for Wi-Fi networks…" is displayed. The phone then displays the
available Wi-Fi Access Points. Select the desired Wi-Fi Access Point (network).
3. Enter the Wi-Fi password if needed, and then tap Connect.
4. When connected to the Access Point, "Connected" is displayed:
10. Configuring Bluetooth
Note: This section is applicable only to models with Bluetooth functionality (models whose
CPN ends with suffix DBW).
The Bluetooth interface is used to connect the phone to a wireless headset or speaker.
To pair and connect a remote Bluetooth device:
1. Press the phone’s MENU hard key to access the 'Settings' menu.
To Next Page
Loading...
