AudioCodes Mediant 1000 MSBG - 3 Restoring Defaults Using Ini File; Figure 3-1: Configuration File Page (MSBG Devices); Figure 3-2: Configuration File Page (Non-MSBG Devices)

Configuration Note 3. Restoring Defaults using ini File
Version 6.4 13 May 2012
3 Restoring Defaults using ini File
You can restore the device to factory default settings by loading an empty ini file to the
device, using the Web interface. The only settings that are not restored to default are the
management (OAMP) LAN IP address and the Web interface's login user name and
password.
The ini file to be loaded must be empty (i.e., contain no parameters) or include comment
signs (i.e., semicolons ";") preceding lines (parameters).
 To restore defaults using the Web interface:
1. Prepare an empty ini file and save it in a folder on your PC.
2. Log on to the Web interface.
3. Open the 'Configuration File' page:
• On the toolbar, click Device Actions, and then choose Load Configuration File.
• In the Navigation tree - Maintenance tab > Software Update menu >
Configuration File.
Figure 3-1: Configuration File Page (MSBG Devices)
Figure 3-2: Configuration File Page (Non-MSBG Devices)
5
5