AudioCodes Mediant 1000 MSBG - Mediant 600 and Mediant 1000; Mediant 800 MSBG and Mediant 800 GW & E-SBC; Figure 4-3: Reset Pinhole Button Location on Mediant 600; 1000 Front Panel (CPU Module); Figure 4-4: Reset Pinhole Button Location on Mediant 800 MSBG Front Panel

Configuration Note 16 Document #: LTRT-30302
Restoring Factory Defaults
4.2 Mediant 600 and Mediant 1000
The procedure below describes how to reset Mediant 600 and Mediant 1000 to default
settings using the hardware reset button.
 To restore Mediant 600 / Mediant 1000 to factory default:

With a paper clip or any other similar pointed object, press and hold down the reset
button (located on the CPU module and labeled //) for at least 12 seconds (no more
than 25 seconds), and then release the button.
Figure 4-3: Reset Pinhole Button Location on Mediant 600 / 1000 Front Panel (CPU Module)
4.3 Mediant 800 MSBG and Mediant 800 GW & E-SBC
The procedure below describes how to reset the Mediant 800 MSBG to default settings
using the hardware reset button.
 To restore Mediant 800 MSBG and Mediant 800 GW & E-SBC to factory default:

With a paper clip or any other similar pointed object, press and hold down the reset
button (located on the front panel) for at least 12 seconds, but no more than 25
seconds.
Figure 4-4: Reset Pinhole Button Location on Mediant 800 MSBG Front Panel