Installation and Maintenance Manual 10. Using the DR-SBA Management Interface
Version 1.0.21 77 Microsoft Teams
10.2.3 Configuring Date and Time
The following procedure describes how to configure the SBA server's date and time.
To configure the date and time:
1. From the Setup menu, select the Setup folder, and then click Date & Time; the
following appears:
Figure 10-8: Configuring Date and Time
2. Click the 'Date' field, and then select the date using the pop-up calendar.
3. Click the 'Time' field, and then select the time using the pop-up time box.
4. Click Save Date & Time.
5. From the 'Time Zone' drop-down list, select the UTC time zone in which the SBA is
located, and then click Save Time Zone; the date in the 'Date' field is automatically
adjusted according to the selected time zone.
To Next Page
Loading...
