Need help?Do you have a question about the AudioCodes Mediant 800C and is the answer not in the manual?
General| Network Interfaces | 2 x 10/100/1000Base-T |
|---|---|
| Voice Codec Support | G.711, G.729, G.722, G.723.1, G.726, iLBC, Opus |
| Management Interface | Web, CLI, SNMP |
| Dimensions | 1U, 19" Rack Mountable |
| Protocols | SIP, H.323, MGCP |
| TDM Interfaces | E1/T1 |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | Up to 95% non-condensing |
Step-by-step guide for deploying the DR-SBA image onto a VMware vSphere Hypervisor (ESXi) virtual appliance.
Selects the appropriate VMware ESXi version and Windows Server OS for the virtual machine.
Changes the VM boot option from EFI to BIOS for proper DR-SBA operation.
Attaches the existing virtual hard disk containing the DR-SBA image to the VM.
Navigates the Datastore browser to locate and select the downloaded VMDK file for the virtual machine.
Ensures the virtual machine is configured with the first BOT priority (SCSI 0:0) for startup.
Step-by-step guide for deploying the DR-SBA image onto a Hyper-V virtual appliance.
Selects Generation 1 for the virtual machine, which is compatible with DR-SBA.
Assigns the minimum required memory (8GB) to the virtual machine for DR-SBA.
Sets up the network interface for the virtual machine to ensure proper connectivity.
Connects the pre-downloaded VHDX file as the virtual hard disk for the VM.
Sets the minimum number of processor cores (2) for the virtual machine.
Initiates the startup process for the newly created virtual machine.
Guides through the initial login process and license activation for the DR-SBA.
Explains how to obtain, activate, and install the DR-SBA license key for the Virtual Appliance.
Details required information like Product Key and Fingerprint for license activation.
Describes receiving the license key via email after successful activation.
Guides on configuring network interfaces, disabling unused NICs, and setting IP addresses.
Instructions for logging into Microsoft Teams, including using Admin credentials or Tenant ID.
Defines the Teams DR-SBA and adds it to Microsoft Teams, either via PowerShell or tenant login.
Provides the PowerShell command to add the DR-SBA with its FQDN and description.
Adds the new SBA FQDN after logging into the tenant, if tenant credentials were not initially provided.
Allows selection of an already defined Teams SBA FQDN and updating related data.
Details importing a PFX file or generating a CSR to assign a certificate for the DR-SBA.
Input Azure AD Application ID and Application Secret to complete DR Teams SBA setup.
Finalizes the DR-SBA setup wizard and closes the configuration interface.
Restarts the Microsoft Teams SBA service to resolve potential issues after setup completion.
To Next Page
