Installation and Maintenance Manual 80 LTRT-33443
Mediant SBA
Figure 10-11: Access List
2. By default, any IP address can access the Web and RDP (Any option).
3. To allow SBA management from a specific IP/Subnet, select the Authorized IP/Subnet
option; the following appears:
Figure 10-12: Access List: Authorized IP/Subnet
4. You can add an IP address/subnet in one of the following formats:
• Single IPv4 address (e.g. "192.168.0.17")
• Single IPv4 subnet by subnet mask (e.g. "192.168.0.17/255.255.255.0")
• Single IPv4 subnet by network bits (e.g. "192.168.0.17/24")
5. Click Add.
6. Click Save to save your changes.
To Next Page
Loading...
