Installation and Maintenance Manual 3. Physical Description for OSN-Based Devices
Version 1.0.21 21 Microsoft Teams
3.2 Rear-Panel Description
The rear panel of the device provides the interface to the OSN server on which the SBA runs.
Figure 3-3: Mediant 800B Rear Panel
Figure 3-4: Mediant 800C Rear Panel
Table 3-2: Rear-Panel Description
Item # Label Description
1 OSN USB Three USB ports (Standard-A type) for connecting computer
peripherals (e.g., mouse and keyboard). These are used for
the OSN server.
2 OSN VGA 15-Pin DB-type female VGA port for connecting to a monitor
(screen). This port is used for the OSN server.
3 - Reset button for resetting the OSN server.
4 GE 1
GE 2
10/100/1000Base-T Ethernet ports (RJ-45) for connecting
directly to the OSN server. For example, one port can be
connected to the LAN (to IP Phones) and the second port to
the WAN interface (to an IP PBX).
Note: the number of ports depends on ordered OSN server
platform.
5
Protective earthing screw.
6 100-240V~4A
50-60Hz
3-Prong AC power supply entry.
Note: Mediant 800C can arrive with Dual Power supply
entries
7 DC IN 12V 10A DC power inlet for accepting a DC terminal block plug.
Note:
■ DC power is applicable only to Mediant 800C.
■ Use only the AC/DC power adaptor that is
supplied by AudioCodes to connect the DC inlet
To Next Page
Loading...
Need help?
General
