Installation and Maintenance Manual 76 LTRT-33443
Mediant SBA
10.2.2 Changing the Login Password
The following procedure describes how to change the login password of the administrator
who is currently logged into the SBA Management Interface.
To change the login password:
1. From the Setup menu, select the Setup folder, and then click Change Admin
Password; the following appears:
Figure 10-7: Changing Login Password
2. In the 'Current Password' field, enter the current password.
3. In the 'New Password' field, enter the new password.
4. In the 'Confirm Password' field, enter the new password again.
5. Click Submit.
To Next Page
Loading...
