Installation and Maintenance Manual 11. Configure DR-SBA Web to Work with HTTPS
Version 1.0.21 93 Microsoft Teams
11 Configure DR-SBA Web to Work with
HTTPS
This section describes how to configure the DR-SBA Web interface to work over HTTPS.
To configure HTTPS for SBA Web interface:
1. For configuring the DR-SBA Web interface to work over HTTPS, a certificate is required.
– You can use same certificate you selected for the DR-SBA (with the SBA FQDN CN)
or install a different certificate for the SBA Web.
2. Open Microsoft Internet Information Services (IIS).
3. Open the” Default Web Site” site and then click Bindings:
Figure 11-1: Default Web Site
The following appears:
Figure 11-2: Site Bindings
To Next Page
Loading...
Need help?
General
