Installation and Maintenance Manual 5. Teams DR-SBA Setup
Version 1.0.21 51 Microsoft Teams
5.6 Set Date and Time
Set the correct date/time/time zone – be sure that you have access to NTP (by default
global NTP is used for workgroup: time.windows.com).
Note: When the SBA is in the workgroup, the NTP can be set via cmd when you RDP to the
SBA.
Set-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Services\w32time\Parame
ters" -Name "NtpServer" -Value "ntp.server,0x8"
Restart # restart Windows Time service
Restart-Service w32Tim
Note: You can skip this step if the date/time are already set.
Figure 5-29: Set Date and Time Zone
To Next Page
Loading...
Need help?
General
