EasyManua.ls Logo

AudioCodes MediaPack 124 - Mounting the Device

AudioCodes MediaPack 124
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 | Page
The Reset pinhole button, located on the front panel, resets the device or restores it to factory defaults. To
restore the device to factory defaults: Disconnect the Ethernet cable and then with a paper clip or any other
similar pointed object, press and hold down the button for at least 12 seconds, but no more than 25 seconds.
Mounting the Device
You can mount the device in a standard 19-inch rack, using the two mounting brackets (supplied) which you
first need to attach to the sides of the chassis.

Other manuals for AudioCodes MediaPack 124

Related product manuals