MP-1xx SIP User’s Manual 5. Configuring the MP-1xx
Version 4.4 103 March 2005
5.9 Advanced Configuration
Use this subdivided menu to set the gateway’s advanced configuration parameters (for advanced
users only).
5.9.1 Configuring the Network Settings
From the Network Settings page you can define:
• IP settings.
• NTP settings.
• SNMP settings.
• Syslog settings.
• RTP settings.
• Ethernet Ports Information (read-only).
To configure the Network Settings parameters, take these 4 steps:
1. Open the ‘Network Settings’ screen (Advanced Configuration menu > Network Settings);
the ‘Network Settings’ screen is displayed.
Figure
5-27: Network Settings Screen
To Next Page
Loading...
Need help?
General
