RXV100
Deployment Guide 18 Document #: LTRT-18195
2.1.2.2 Logging in to RXV100 as Windows Administrator
To log in to the RXV100 as Windows Administrator:
1. From the Main Menu, touch More, and then touch Settings.
2. Enter the Administrator password, and then touch Yes.
3. Select Windows Settings, and then select the Administrator account displayed in the lower
left corner; a prompt appears requesting the Administrator password.
4. Enter the password; upon successful validation, you are logged in as an Administrator to
manage the RXV100.
Note: The default Windows Administrator password is RXV100MTR. It is recommended to
replace it as shown next.
2.1.2.3 Replacing Windows Administrator Password
To change the Windows Administrator password:
1. Log in to the RXV100 as Windows Administrator (as shown in Section 2.1.2.2).
2. Choose the Settings menu > Sign-in Options > Password.
3. Change the password.
To Next Page
Loading...
Need help?
General
