AudioCodes RX50 User Manual

Deployment Guide 1. Before Getting Started
Version N/A 7 RXV100
1 Before Getting Started
Before you connect the RXV100, make sure:
 A Microsoft Teams Rooms (MTR) account is created and licensed. Before installation,
everything must be synchronized. The account is used to access the calendar as well as
to accept or decline calendar invites for the Meeting Room. Those who set up a meeting
can invite the Meeting Room and can book this resource by scheduling a meeting with it.
MTR will be able to join that meeting and provide various features to the meeting
attendees.
Note:
• Without a device account, none of these features will function.
• MTR is a resource account and shouldn't be configured to use multi-factor authentication
(MFA). For more information, see https://docs.microsoft.com/en-us/microsoftteams/rooms/rooms-
authentication#modern-authentication
• Refer to:
♦ https://docs.microsoft.com/en-us/microsoftteams/rooms/with-office-365#add-a-
device-account for information about adding a device account when deploying
MTR with Microsoft 365 or Office 365.
♦ Configure accounts for Microsoft Teams Rooms - Microsoft Teams | Microsoft
Docs for information on how to create accounts used by MTR in Microsoft
Exchange and Skype for Business.
♦ Prepare your Environment - Microsoft Teams | Microsoft Docs CCCC for the
steps to take to prepare your environment so you can use all of the features of
MTR.
Note: Updates to the app are automatically installed from the Microsoft Store during
nightly maintenance; this is the recommended method to get updates. For manual
update, see MTR Application and Windows Upgrade.
 There is a working network/internet connection for the device to use.
• It is strongly advised to use a LAN connection over a wireless connection.
• It must be able to receive an IP address by using DHCP (MTR cannot be configured
with a static IP address at the first startup, but afterwards a static IP address for the
device can be configured on the device or on the upstream switch or router).
• Must have the following ports open (in addition to opening the normal ports for
media):
♦ HTTPS: 443
♦ HTTP: 80
• If your network runs through a proxy, you'll need the proxy address or script
information as well.
 The following items are in your possession:
• An Ethernet cable to connect the RXV100Hub to the network
• A PoE port to connect the RX50 (bundle-dependent) to the network and power (it
can only be powered via PoE)
• An HDMI output cable (HDMI out) to connect the display to the RXV100Hub
• (Optional) A second HDMI cable if using 2 monitors
• (Optional) A third HDMI input cable (for HDMI ingest) for sharing content from a PC

AudioCodes RX50 Specifications

General

Brand	AudioCodes
Model	RX50
Category	Conference System
Language	English