Need help?Do you have a question about the AudioControl Rialto 400 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Signal-to-Noise Ratio | > 100 dB |
| Input Impedance | 10 kOhms |
| Frequency Response | 20 Hz - 20 kHz |
| Output Impedance | 4 Ohms |
| Inputs | RCA |
| Outputs | Speaker outputs |
| Power Output (8 Ohms) | 50 Watts RMS per channel |
Instructions for placing the unit on a level, firm surface, away from heat and moisture.
Explanation of the SMART Input Priority feature and its four dip switch settings for source selection.
Guide to level matching and adjusting input gain controls for optimal volume and performance.
Instructions for adjusting the AccuBASS™™ level to enhance bass response and audio richness.
Troubleshooting common issues like 'No Sound' and 'In Protection' modes.
Information on how to obtain service, contact support, and prepare a unit for return.
Explanation of the AudioControl warranty terms and conditions for the Rialto 400.
To Next Page
