To Next PageTo Next Page
Need help?Do you have a question about the AudioControl D-4.800 and is the answer not in the manual?
Power Output| power output at 4 ohms | 4 x 125 Watts |
|---|---|
| power output at 2 ohms | 4 x 200 Watts |
| power output bridged at 4 ohms | 2 x 400 Watts |
Audio Performance| frequency response | 20 Hz - 24 kHz |
|---|---|
| signal to noise ratio | 102 dBa |
| total harmonic distortion plus noise (THD+N) | < 0.1% |
Inputs and Outputs| speaker-level inputs | 6 x summable, 40 V max |
|---|---|
| line-level inputs | 4 x balanced RCA, 8 V max |
| line-level outputs | 2 x balanced RCA, 8.5 V max |
Digital Specifications| digital input sample rate | 32 - 96 kHz |
|---|---|
| digital input bit depth | 16 / 24 bit |
| crossover frequencies | 20 Hz - 20 kHz |
Weight and Dimensions| weight | 5.0 lbs |
|---|---|
| width | 9.00" |
| depth | 7.95" |
| height | 2.10" |
Details fuses, power terminals, RCA line-level, and speaker-level audio connections.
Covers external device ports (USB, Option, Remote) and signal sensing features (GTO, MILC).
Explains Power/Protection LEDs, Communications LED, and Maximized Input/Output LEDs.
Illustrates the basic power connections required for the amplifier, including remote turn-on.
Shows how to connect the amplifier using speaker-level outputs from a factory radio.
Demonstrates connecting the amplifier using line-level outputs from an aftermarket radio.
Illustrates connecting the amplifier with an external subwoofer amplifier for a complete system.
Details the installation and usage of the optional ACR-3 remote dash control unit.
Provides steps for safely removing and reattaching the amplifier's top lid.
Explains the Input View for setting gains, polarities, and delays using the RTA.
Details the Output View for setting routing, levels, crossovers, and EQ for audio outputs.
Describes the Dashboard View for simultaneously monitoring input and output settings.
