To Next PageTo Next Page
Need help?Do you have a question about the AudioControl ACM-1.300 and is the answer not in the manual?
General| Brand | AudioControl |
|---|---|
| Model | ACM-1.300 |
| Category | Amplifier |
| Language | English |
Replace fuse with same style and Ampere rating. Disconnect power before inspection.
Connects to +12V battery post. Use 8 gauge or thicker wire for adequate current.
Connects to 12V remote trigger output. Turns amp on when head unit is on.
Connects to vehicle chassis for a good ground connection.
Connects speaker outputs from amps/radios. Sums L/R signals for mono subwoofer.
Indicates power status. Should turn on when system is correctly connected and powered.
Indicates amplifier protection status. Flashing codes diagnose problems.
Turns amplifier on/off based on audio signal presence. Can be bypassed for remote turn-on.
Enhances lower bass frequencies. Threshold and Level controls adjust its operation.
Selectable 12 dB/Octave Linkwitz-Riley points for matching speaker frequency range.
Adjusts the overall volume output level. Counterclockwise decreases, clockwise increases.
Indicates when the amplifier gain has been maximized for optimum performance.
