To Next PageTo Next Page
Need help?Do you have a question about the AudioControl ACM-4.300 and is the answer not in the manual?
Power Output| power output at 4 ohms | 4x50 Watts |
|---|---|
| power output at 2 ohms | 4x75 Watts |
| bridged power output at 4 ohms | 2x150 Watts |
Audio Performance| frequency response | 10 Hz - 30 kHz |
|---|---|
| total harmonic distortion + noise | < 0.01% |
| signal-to-noise ratio | 102 dBa, Ref 50 Watts @ 4 Ohms |
Connectivity| speaker-level inputs | 2x, 40V (400W) max |
|---|---|
| line-level inputs | 2x, balanced RCA, 8V max |
| power / ground wire gauge | Between 8 and 4 AWG |
Physical Specifications| weight | 2.15 lbs |
|---|---|
| dimensions | 9.41" W X 2.97" D X 1.75" H |
| fuse rating | 1 X 30 Amps |
Improper installation can cause injury or death; use qualified personnel and proper wiring (8 AWG).
Avoid shock, protect hearing from high sound pressure levels, and follow recycling guidelines.
Illustrates stereo (2 Ohms min) and bridged mono (4 Ohms min) speaker connection configurations.
Selectable 12 dB/Octave at 80 Hz, 120 Hz, or Bypass for speaker matching.
Follow steps for basic setup: disconnect battery, pick location, mount securely, drill cautiously, connect cables.
Connect audio inputs (speaker-level or line-level, not both) and loudspeakers respecting impedance.
Connect power/ground, remote. Reconnect battery, adjust gain, set crossovers, and enjoy.
Details power output, frequency response, THD, S/N ratio, input requirements, weight, and dimensions.
