To Next PageTo Next Page
Need help?Do you have a question about the AudioControl LC-6.1200 and is the answer not in the manual?
General| Channels | 6 |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Signal to Noise Ratio | > 100 dB |
| THD+N | < 0.1% |
| Input Sensitivity | 200 mV - 4 V |
| Power at 2 Ohms | 200 Watts |
| Bridged Power at 4 Ohms | 400 Watts |
| Crossover | 12dB/octave |
Lists power output ratings: 200W @ 2 Ohms, 125W @ 4 Ohms, 400W bridged @ 4 Ohms.
Alerts to dangerous voltage, risk of electric shock, and emphasizes qualified personnel for servicing.
Details the 40A fuses and the +12V battery/ground input terminals.
Details the terminals for connecting loudspeakers, including impedance notes.
Details AccuBASS, Crossover, Gain, Threshold, and Level controls for channels 1/2.
Details AccuBASS, Crossover (HP/BP), Gain, Sum, and Mode controls for channels 3/4.
Details AccuBASS, Crossover (LP/HP), Gain, MILC, Sum, and Mode controls for channels 5/6.
Details Front High Level, AccuBASS/ACR-1, HP Crossover, Range, and Gain for channels 1/2.
Details 1/2 & 3/4 Bus Sum, AccuBASS/ACR-1, HP Crossover, and Gain for channels 3/4.
Details Mono/Stereo, Gain, AccuBASS/ACR-1, and Crossover Type (LP/HP) for channels 5/6.
Lists key specifications including power output, frequency response, S/N ratio, and THD+N.
Explains LED color codes for power-up, reset, and various protection activation states.
