Skip to content
Manuals+
User Manuals Simplified.
Home » audioengine » audioengine 512 bluetooth speaker user manual
audioengine 512 bluetooth speaker user manual
Contents [ hide
1 512 Quick Setup
2 512 Troubleshooting Tips
3 Related Manuals:
512 Quick Setup
Power ON/OFF
To turn on your 512, press and hold the power button on the top panel for about 3 seconds, then
release the button.
The power button will light up and a sound will indicate that the speaker is on.
Wireless Connection
After charging the 512 battery, turn on the power.
Press and hold the Bluetooth button on the 512 top panel until a voice says “pairing”. The Bluetooth
button will flash indicating the speakers are in pairing mode.
On your phone, tablet, or computer, go to Bluetooth settings and turn on Bluetooth.
Select the 512 from the Bluetooth device list to connect. Your 512 will say “connected”.
When your 512 is paired and connected, the indicator on the Bluetooth button will glow solid Blue.
To put the 512 back into pairing mode and disconnect from a device press and hold the Bluetooth
button on th 512 top panel until the indicator begins flashing.
Aux Input
Usethe512 audio input to connect non-Bluetooth devices by connecting any 3.5mm mini-jack audio
cable from your device’s audio output (headphone jack, etc.) to the “AUX” input jack on the side of the
512.
Press the AUX button on the 512 top panel if it is not already illuminated.
Volume
To Adjust the volume of the 512, use your device or press the volume up “+” and volume down “-”
buttons on the top of the 512.
Play/Pause
To pause playback, or resume playback of a paused song, use your device or press the Play/Pause
“►❙❙” button on the top of the 512.
Battery Charging
To Next Page
Need help?
General
