AudioEngine A2+ User Manual

Placement
Place
your Audioengine 2+
speakers at a
comfortable listening
location
with
no obstructions at
the
front
or
back.
If
you find
that
raising them
to
an
angle
produces the best sound, this
is
easily
achieved by adding
the
DS
1 Desktop Stands
(available
separately).
We
recommend at
least
3 inches
of
clearance around
the
back
of
the
cabinet for good air
circulation.
Features
• Built-in
power amplifiers
• Dual audio inputs
•
USB
computer audio
input
·Variable
audio
output
·High-quality
connectors
·Custom
Kevlar woofers and
silk
dome
tweeters
•
Power-saving
idle
mode
• Hand-built cabinets
• Magnetically shielded
• Cables included

AudioEngine A2+ Specifications

General

Outputs	RCA variable line-out
Frequency Response	65Hz-22kHz ±2.0dB
Signal-to-Noise Ratio	>95dB (typical A-weighted)
Total Harmonic Distortion	<0.05% at all power settings
Type	Powered speakers
Amplifier Type	Class AB
Power Output	60W peak power total (15W RMS / 30W peak per channel)
Drivers	2.75" aramid fiber woofers, 3/4" silk dome tweeters
Inputs	3.5mm stereo mini-jack, RCA
Dimensions	6" x 4" x 5.25" (H x W x D)
Input Voltage	100-240V, 50/60Hz
Input Impedance	10k ohms
Protection	thermal protection