2
IMPORTANT FOR LASER PRODUCTS
REPRODUCTION OF LABELS
1. CLASSIFICATION LABEL, PLACED ON REAR ENCLOSURE.
2. WARNING LABEL
3. CAUTION: Do not open the unit. There are no user serviceable parts inside the unit; consult
all servicing to qualified authorized service personnel.
POWER SOURCE
This unit is designed to be operated on AC and DC.
AC OPERATION
Plug the smaller end of AC power cord into AC jack on unit and the other bigger end into AC
230V ~ 50Hz wall outlet. The batteries will be automatically disconnected.
DC OPERATION
Open the BATTERY COMPARTMENT DOOR. Install 8 pcs 1.5V UM-2/C size batteries (not
included) into compartment. Please follow correct polarities as indicated.
NOTE:
1. The AC line cord must be removed for battery operation.
2. To avoid damage which may result from leaking batteries, remove the batteries when they
become weak or when the unit is not to be used for long period of time.
BASIC FUNCTION
SWITCHING ON THE UNIT
z Connect the power cable to the main socket and the other end to the product.
z Set the FUNCTION SWITCH to CD/MP3/USB/SD/AUX or RADIO position.
z The device will enter in STANDBY mode after 15 minutes of inactivity. To restart position the
FUNCTION switch to OFF and then on RADIO / CD or press the STANDBY (22).
TO ADJUST VOLUME
Rotate the VOLUME CONTROL right or left to increase or decrease volume.
HEADPHONES
For private listening, plug the headphones/earphones (not included) into PHONES jack (3.5 mm
diameter).
CAUTION: Long time listening with headphones/earphones at high volumes may cause harmful
damage to users’ ears.
To Next Page
Loading...