6
REPEAT PLAY
CD Repeat: Repeat the current track, repeat all tracks, Intro, Random.
MP3 Repeat: Repeat the current track, Folder, Intro, Random.
To Repeat a Single Track
1. Press the PROG./P-MODE button once in play mode, “
” will shown on the display. The
current track will be played repeatedly until the STOP button is pressed
2. To cancel Repeat function, press the PROG./P-MODE button, until the “
” disappear on
the LCD display.
To repeat all the Tracks
1. Press PROG./P-MODE button 2 times for CD and 3 times for MP3 in play mode,
“
ALL” shows on the display, all tracks on the disc will be played repeatedly until the
STOP button is pressed.
2. To cancel Repeat function, press the PROG./P-MODE button, until the “
ALL” disappear
on the LCD display.
To repeat current Directory (for MP3 only)
1. Press PROG./P-MODE button 2 times in play mode, “
DIR” shows on the display, the
current directory will be played repeatedly until the STOP button is pressed.
2. To cancel Repeat function, press the PROG./P-MODE button, until the “
DIR” disappear
on the LCD display.
INTROSCAN PLAY
Press the PROG./P-MODE button in play mode till the “INTRO” shows steady on the display,
the unit will start to play the first 10 seconds of music of each track, until all tracks are played
over and then stop.Press the PROG./P-MODE button once to cancel ,The “ INTRO ” disappear
on the LCD display.
RANDOM PLAY
Press the PROG./P-MODE button in play mode till the “RAN ” shows steady on the display, the
random play will start from any one track (or press SKIP UP button), until all tracks are played
over and then stop. Press the PROG./P-MODE button once to cancel, The “ RAN ” disappear
on the LCD display.
EQ SELECTION
Press EQ button continuously during disc playback mode to select EQ sound effects among
DBB, POP, CLASSIC, JAZZ, ROCK and NORMAL.
LISTENING TO USB/SD/MMC CARD
USB PLAYBACK
The USB input jack is compatible with a data flash memory key, it is not guarantee the
compatibility with MP3 players with proprietary software.
1. Set the FUNCTION switch to CD/MP3/USB/SD/AUX position, press "STANDBY" button to
turn on the unit. Then press and hold the STOP/USB button to select USB playing mode.
2. Connect the USB flash disk device into the USB port.
3. If the USB is readable, The LCD will display the total number of albums and tracks stored
inside the USB. Then the playback to start playing.
4. Press the PLAY/PAUSE/SD button to temporarily stop. The play time will flash.
5. Press the STOP/USB button to stop playing. The display will show total number of albums
and tracks.
6. The function are the same as per MP3 playback.
To Next Page
Loading...