AUDIOLINE 704 - Registering a New Audioline 704 Handset; De-registering an Audioline 704 Handset

English
www.doro.com 17
Expanded System
Registering a new handset
To enable the use of more than one handset a registration has to be performed.
Every new handset must be registered in order to use the current base unit, each
base unit can handle up to 5 handsets.
On registration the handset is allocated a handset number for use on the new
base unit, the handset numbers are 1-5.
1.
Press and hold
J
on the base unit until
Q
starts  ashing. Registration
Q
starts  ashing. Registration
Q
mode will remain active for approximately 3 minutes.
2.
Press and hold both
8
and
9
together until you hear a long beep.
3.
Select the base unit you wish to register by pressing the corresponding
number button
1
-
4
.
4.
When PIN is displayed, enter the units PIN number (0000 for this model).
5.
If the registration is successful the handset will return to standby mode in a
few seconds.
De-registering another handset
Any additional handset can easily be de-registered from a base unit.
1.
Simultaneously press and hold
8
and
c
until you hear a beep.
2.
Enter the units PIN number (0000 for this model).
3.
When HS is shown in the display, enter the handset number you wish to
delete.